KNUTD
Kyiv National University of Technologies and Design

APPLIED MECHANICS

FACULTY OF MECHATRONICS AND COMPUTER TECHNOLOGIES

Specialty “131 APPLIED MECHANICS”

Educational program “Applied mechanics”

The educational degree "bachelor"

DEPARTMENT OF APPLIED MECHANICS AND MACHINES

Address: 
Education Building 1, room 1-0152, 1-0165
Department of Mechanical Engineering
Kyiv National University of Technologies and Design,
Mala Shyianovska (Nemyrovycha-Danchenka) Street, 2,
Kyiv 01011,
Ukraine

Tel.: +38044-215-21-68, +38044-256-29-94

E-mail: 

Levels of education for which recruitment is carried out:

The first (bachelor's) level of higher education.

Training is conducted by government order and at the expense of physical or legal persons.

To enter the 1st year for a bachelor's degree, entrants take competitive subjects (EIE).

Admission to the bachelor's degree is conducted in accordance with the "Rules of admission to the Kyiv National University of Technology and Design".

Phones and contacts of the admissions committee

Address: 
Education Building 4, 2nd floor
Mala Shyianovska (Nemyrovycha-Danchenka) Street, 2,
Kyiv 01011,
Ukraine

Tel.: +38044-256-29-75

E-mail: 

Educational and professional program Applied Mechanics in the specialty 131 Applied Mechanics - for those who want to learn how to design and construct machines and their components using modern tools and tools of automated design, calculations, virtual tests, debug, maintain various technological machines, including electronics and mechanics (mechatronics), transport and logistics, robotic systems, have the skills to work in information technology programming systems.

The training program takes into account the specifics of development of promising areas of industrial engineering, the use of leading technologies of design, calculations, 3D modeling, maintenance of various industries of the machine-building complex of Ukraine and abroad.

Typical initial positions of bachelors: the bachelor in applied mechanics is prepared for performance of professional work on such positions: the mechanic, the mechanic of production, the mechanic on repair of the equipment, the mechanic of reloading machines, the mechanic of shop, the mechanic-adjuster, the technician on automation of production processes, the technician on operation and repair equipment, tool technician, labor-intensive mechanization technician, design technician (mechanics), technician-technologist (mechanics), copyist of technical documentation, draftsman, draftsman-designer, instructor on operational, production-technical and organizational issues, laboratory assistant (industries) technicians), technicians for adjustment and testing, technicians for production preparation, technicians for preparation of technical documentation.

Competitive advantages:

• staffing - highly qualified teaching staff in accordance with the requirements of the profile and direction of the specialty;
• partnership with leading domestic and foreign IT companies "Intersed Ukraine", Engineering Company "Technopolis" and CoreTech System Co., Ltd. - official representatives of world leaders in the field of 3D design solutions and technological preparation of production DS SolidWorks Corp., Parametric Technology Corp., Geometric Technologies Inc., and ANSYS Inc. and Moldex 3D. On the basis of license agreements concluded with companies, the department uses in the educational process and research training programs and specialized software SolidWorks, CAMWorks, Creo PTC, and ANSYS and Moldex 3D;
• partnership with domestic and foreign educational and research institutions;
• partnership with leading industrial enterprises and institutions of the regions MTK LLC, Technopolis Engineering Company LLC, DANA-MODA LLC, Legpromengineering LLC, MR ENGINEERING LLC, TexTemp PJSC, ArtemN SAH », Camozzi and others;
• existing scientific circles "Robotics", "Mechatronics" and "Industrial Design", where students acquire the ability to make independent decisions of professional, scientific and innovative problems;
• student teams - multiple winner of the All-Ukrainian Olympiads in various specialties in the field of mechanical engineering;
• the department promotes professional orientation and employment of graduates;
• the university has sports sections and creative clubs.

Studying at the university

The educational process is accompanied by modern communication tools through the "Modular environment of the educational process KNUTD", "Electronic Journal", "Zoom", "Google Meet" and others that provide students with convenient access to electronic educational resources, including teaching materials from disciplines (lecture notes, guidelines, textbooks, manuals, presentation materials, etc.), the opportunity to submit reports, perform tests, consult with teachers on forums, learn about the schedule of classes, consultations, exams, learning outcomes and much more, which also allows you to implement continuity of distance learning even in conditions of a possible lockdown.

Practical training

At the Department of Applied Mechanics and Machines in the training of specialists in applied mechanics in-depth study of modern 3D modeling systems using CAD / CAE / CAM systems SolidWorks, CAMWorks, Creo PTC, ANSYS and Moldex 3D augmented reality technologies Vuforia Studio PTC, etc. used in the project products for various purposes (parts and mechanisms of machines, welded structures, sheet metal and plastic products, molds and other products of various complexity), industrial design and visualization.

Students are given the opportunity to take the SolidWorks Proficiency Exam and obtain the appropriate Dassault Systemes International Certificate (CSWA: Certified SOLIDWORKS Associate).

Professional disciplines are conducted in specialized classrooms, which are equipped with elements of mechatronics from Festo (Germany), Camozzi, Arduino (Italy) and robotics, industrial and mock-up microcontrollers from Arduino, various programming languages (Arduino IDE, Marzing Grlinbl, FluidBim, Diagram and others), 3D printers, etc.

In order to deepen students' knowledge of fundamental and general professional disciplines, annual internships at basic enterprises and research institutions are provided.

The level of preparation of students by the Department of Applied Mechanics and Machines is confirmed by numerous diplomas, certificates and prizes at national competitions and Olympiads, as well as high positions of graduates of previous years.

As a result of training, students acquire the following knowledge and professional skills:

• understand the basics of information technology, programming, practical use of application software to perform engineering calculations, information processing and experimental research results;
• understand the basics of applied mechanics in the sections of statics, kinematics and dynamics, theory of mechanisms, mechanics of materials and strength of structures, mechanics of liquids and gases, heat engineering, electrical engineering, electronics;
• designs, methods of selection and calculation, basics of maintenance and operation of drives of machine tools and robotic equipment;
• principles of operation of automated control systems of technological equipment, in particular microprocessor, to choose and use the optimal means of automation.
• select and apply suitable mathematical methods to solve problems of applied mechanics;
• use knowledge of the theoretical foundations of fluid and gas mechanics, heat engineering and electrical engineering to solve professional problems;
• perform calculations for strength, endurance, stability, durability, rigidity of machine parts, evaluate the reliability of machine parts and structures in the process of static and dynamic loading;
• perform geometric modeling of parts, mechanisms and structures in the form of spatial models and projection images and design the result in the form of technical and working drawings;
• create and theoretically substantiate the design of machines, mechanisms and their elements on the basis of methods of applied mechanics, general principles of design, the theory of interchangeability, standard methods of calculating machine parts;
• apply regulatory and reference data to control the compliance of technical documentation, products and technologies with standards, specifications and other regulatory documents;
• practical use of computerized systems of design (CAD), production preparation (SAM) and engineering research (CAE);
• assess the technical and economic efficiency of production and make the optimal choice of equipment and equipment of technical complexes;
• take into account in decision-making the main factors of man-made impact on the environment and the main methods of environmental protection, labor protection and safety.
• free to communicate professionally orally and in writing in the state and foreign languages, including knowledge of special terminology and interpersonal skills;
• demonstration of knowledge of designs, bases of a choice, calculation, service and operation of drives of the machine tool and robotic equipment, to carry out the optimum choice of the equipment and a complete set of technical complexes.

The place of professional activity of a specialist in applied mechanics is:

• enterprises that use technological, automated and robotic equipment of various industries;
• services for maintenance, operation and repair of automated and robotic logistics systems;
• automated and robotic warehouses in various industries;
• automated and robotic technological processes of production in various industries;
• design and technology departments of enterprises, institutes and bureaus, in installation, repair and maintenance services;
• organizational and management services, research institutes and laboratories;
• commercial firms selling technological equipment and machine-robotic systems;
• advertising agencies for the sale of technological equipment and machinery.

The next level of higher education.

Upon successful completion of their studies, graduates receive a diploma of basic higher education of the established state standard in the specialty 131 Applied mechanics:

• Bachelor of Industrial machinery engineering - 3 years and 10 months of study (full-time study on the basis of complete general education).
• Bachelor of Industrial machinery engineering - 1 year and 6 months of study (full-time study on the basis of a junior specialist, or bachelor).

Graduates who have successfully mastered the educational-professional bachelor's program "Applied mechanics" can continue their studies in the master's program in "Mechatronics and Robotics", or "Equipment for light industry and consumer services" with further studies in postgraduate and doctoral studies in the educational and scientific program "Industrial machinery engineering".

The military training.

Simultaneously with the basic higher education, 3rd and 4th year students are given the opportunity to obtain a military accounting specialty "Organization of food, clothing, skipper and trade and household supplies" upon receipt at the end of the officer's rank. The time of military training is coordinated with the schedule of students at the university.

All students of the Faculty of Mechatronics and Computer Technology, who live in cities and towns outside of Kyiv and Kyiv region, are provided with accommodation in dormitories located near the university buildings.

It is possible to study according to an individual, student-friendly schedule, which allows you to combine study with work in senior courses.

"TO BUILD - YOU NEED TO KNOW, TO KNOW - YOU NEED TO LEARN"